Regarding vessels and tubes containing combustible gases or dusts, it is important to acquire knowledge on the conditions under which a fuel and oxidizer could undergo explosive reactions. These conditions are strongly dependent on the pressure and temperature. Given a premixed fuel-oxidizer system at room temperature and ambient pressure, the mixture is essentially unreactive. However, if an ignition source is applied locally and the composition of the mixture is within certain limits (the so-called flammability limits), a region of explosive reaction can propagate through the gaseous mixture due to mainly two phenomena:
Characterizing potential explosive reactions is one of the main objectives of hazard assessment. Safeguards to be implemented in process equipment, best process conditions, appropriate prevention and/or mitigation measures, are some of the key purposes to be clarified when handling flammable mixtures. This characterization requires knowledge of several parameters that directly influence on the explosive reaction behavior. One of these parameters is the Laminar Flame Speed, one of the key factors that define the kinetics of the reaction. The present paper addresses how to characterize fuel-oxidizer explosive reactions, and highlights the importance of the laminar flame speed concept. The primary goal of this research is to provide reliable data on laminar flame speeds in order to ensure accurate calculations for a Process Hazard Analysis (PHA).
To download our resources, you must become a registered site user. After you register, you will receive an email with a login username and password.
Stay Informed With Our Technical Resources
Register to receive full access to publications on chemical reactivity, combustible dust hazards, and industry safety regulations authored by the expert leadership at ioKinetic.